|
Fluorocarbon Elastomers : WANTED TO BUY
Location: UKRAINE, MARIUPOL
synthetic rubber.
ТЕХХАРАКТЕРИСТИКИ ТРЕБУЕМЫХ КАУЧУКОВ
БК-1675 Н
Synthetic butyl rubber Moony viscosity (при 125ºС) 46-56
unsaturation /Непредельность 1,6±0,2 мол.%
СКН 26М
Synthetic nitrile rubber Moony viscosity 45-52
Binded acrylonitrile content 26-28%
СКН-40М
Synthetic nitrile rubber Moony viscosity 50-60
Binded acrylonitrile content 38-40%
СКН-18М
Synthetic nitrile rubber Moony viscosity 45-52
Binded acrylonitrile content 16-18%
RSS-1 NATURAL
Natural rubber Moony viscosity 70-80 Ро-40-50
Ash content 0,15-0,30%
СКМС-30 styrene
butadiene-metilstyrene rubber
АРКМ-15 (здесь зашифрован способ изготовления)
(СВР 1705)
Moony viscosity 47-51
Viscosity dispersion ±2
Oil filled 15-17%
СКИ-3(11) isopren rubber Moony viscosity 65-74
plasticity 0,36-0,41
relative strength , Н/м 30,4 МПа
percent elongation , Н/м 800%
СКФ-32 fluoroelastomer, analogue КEL-F
produced in the USA shrinkage loss 16-25%
Moony viscosity (при 160ºС ) 80-90
relative strength , Н/м 19,6 МПа
percent elongation , Н/м 130%
СКД-Н stereoregular butadiene rubber Moony viscosity 40-49
Ash content Н/б 0,5%,
Moisture Н/б 0,3%
1.Vulkanol OT
2. Rhenogran HMDC-70/AEMD - 2
3. Rhenofit CF
4. Rhenofit D/A
5. Rhenofit TAC/S
The parts made on the basis of this rubber should possess following features:
Fragility temperature (Tg) is -45/-50ºC, fuel, oil resistance.
Or suggest us the NBR grade with Tg -45/-50ºC.
Moony viscosity 45-50.
Listing ID: LW790734
|
|
